基于Fluent的高压水射流喷嘴优化模拟研究

为了提高高压水射流技术的破煤效率,采用Fluent软件对高压水射流的喷嘴结构和几何参数进行了优化模拟。通过分析水射流的轴向速度和壁面静压分布,选择了最佳的喷嘴结构和几何参数。结果表明:圆柱形喷嘴的最大射流速度发生在喷嘴内部,而锥形和锥直形喷嘴的最大射流速度发生在喷嘴外部,且锥形和锥直形喷嘴的最大射流速度和最大压力均明显大于圆柱形喷嘴,考虑到水射流的附壁效应,锥形喷嘴为最佳选择。锥形喷嘴的最优几何参数为:喷嘴出口直径3 mm,喷嘴锥角7°,喷嘴长度9 mm。高压水射流喷嘴的优化对提高煤层瓦斯抽采效率具有重要意义。     

Copy-move forgery detection of duplicated objects using accurate PCET moments and morphological operators

This paper presents a new method for copy-move forgery detection of duplicated objects. A bounding rectangle is drawn around the detected object to form a sub-image. Morphological operator is used to remove the unnecessary small objects. Highly accurate polar complex exponential transform moments are used as features for the detected objects. Euclidian distance and correlation coefficient between the feature vectors are calculated and used for searching the similar objects. A set of 20 forged images with duplicated objects is carefully selected from previously published works. Additional 80 non-forged images are edited by the authors and forged by duplicating different kinds of objects. Numerical simulation is performed where the results show that the proposed method successfully detect different kinds of duplicated objects. The proposed method is much faster than the previously existing methods. Also, it exhibits high robustness to various attacks such as additive white Gaussian noise, JPEG compression, rotation, and scaling.     

对称消声器传递损失测量及误差修正

为了提高对称消声器传递损失的测量效率，基于声学理论分析，提出了一种单负载法传递损失计算模型。针对反射系数较大的吸声末端，导致该方法在实际测量中存在较大误差的问题，推导出了一种能够消除测试管道末端反射声波在上、下游形成多次反射的修正公式。通过自制阻抗管进行试验测试，结果表明：在末端声学负载吸声性能良好的情况下，单负载法传递损失计算模型能够精确计算出对称消声器的传递损失；修正公式能够有效地消除末端负载所引起的反射波对传递损失计算的影响，降低对末端声学负载吸声性能的要求，保证单负载传递损失计算模型的适用性。     

管状带式输送机在线纠扭托辊的研究与应用

管状带式输送机是一种新型环保的散状物料连续输送设备,在运行过程中受各种因素影响,头、尾过渡段经常会跑偏,管状段经常会扭转,常规停机调偏纠扭方法已不能胜任复杂路线长距离管带机稳定运行的要求。为适应市场发展趋势,设计人员分析了管带机扭转原因,结合纠扭基本原理及常规纠扭方法,新开发出一种在线(不停机)纠扭托辊并投入项目应用。     

Experimental study on free and submerged multi-jets

The flow characteristics of the hydraulic jump due to parallel jets are different from the classical jump emerging from a single gate. Due to the highly complex flow field at the downstream pool, deciding about the tailwater measuring location is a challenging issue affecting the flow measuring accuracy. Experiments are conducted herein, on different parallel jets’ configurations for both free and submerged flow conditions. To quantify the flow uniformity, for any downstream cross section, the associated momentum correction factors, β₂, were estimated for the free-flow condition. It is found that β₂-values depend significantly on the measuring location, and consequently the available conjugated depths relationship results in poor estimation when measuring location moves downstream. Employing Buckingham analysis, a general formula is proposed to calculate the momentum correction factors associated with the free hydraulic jump at different downstream measuring locations. The experimental results of this study indicated that such a formula enhances distinguishing between free and submerged flow conditions of the gates installed in parallel. Finally, a dimensionless stage-discharge formula is presented to predict the submerged flow rate through parallel gates of different gate openings and widths.     

测井曲线标准化方法研究

由于长岭凹陷区经过近60年的勘探开发,再加上井场井眼条件的差异、测井系列、仪器刻度、测量时间及操作者不同等因素,使得各测井曲线存在系统误差。因此在开展储层参数研究和有效厚度划分时,为消除这些非地层因素对原始资料的影响,有必要对测井曲线进行标准化,以保证解释结果的合理性与可靠性。测井曲线标准化方法可以分为定性和定量两种类型。其中定性方法主要包括直方图法标准化校正、均值法标准化校正和重叠图法标准化校正;定量方法则为趋势面分析校正法。本论文利用Matlab软件,采用趋势面方法对研究区域内的井进行测井曲线标准化。结果表明经过趋势面法标准化校正能够消除不利因素,准确的提取出测井曲线中的各种有用地质信息。     

An efficient nonlinear polynomial color characterization method based on interrelations of color spaces

A well-known color characterization method is to take an image of a color chart and then to find the mapping matrix from the digital RGBs to the corresponding known CIEXYZs. However, the prediction errors are generally large in CIELAB color space because of the nonlinear transformation from CIEXYZs to CIELABs. In this article, we propose an efficient and simple nonlinear method for the color characterization of input devices. The approach for deriving a colorimetric mapping between digital RGB signals and CIELAB tristimulus values uses the polynomial modeling by considering the interrelations among the standard CIE color spaces. Furthermore, to improve the accuracy of solution, we take the polynomial root terms extension. Our algorithm is simple to implement because only a least-squares mapping should be solved. Various computational results are given to demonstrate the efficiency and capability of the proposed method.     

Modified transform-based gamma correction for MRI tumor image denoising and segmentation by optimized histon-based elephant herding algorithm

Medical image processing is typically performed to diagnose a patient's brain tumor prior to surgery. In this study, a technique in denoising and segmentation was developed to improve medical image processing. The proposed approach employs multiple modules. In the first module, the noisy brain tumor image is transformed into multiple low- and high-pass tetrolet coefficients. In the second module, multiple low-pass tetrolet coefficients are applied through a modified transform-based gamma correction method. Generalized cross-validation is used on multiple high-pass tetrolet coefficients to obtain the best threshold value. In the third module, all enhanced coefficients are applied to the partial differential equation method. In the final module, the denoised image is applied to Atanassov's intuitionistic fuzzy set histon-based fuzzy clustering method with centroid optimization using an elephant herding method. Accordingly, the tumor part is segmented from the nontumor part in the magnetic resonance imaging brain images. The method was assessed in terms of peak signal-to-noise ratio, mean square error, specificity, sensitivity, and accuracy. The experimental results showed that the suggested method is superior to traditional methods.     

Analysis and improvement of the influence of sample shape on Pu measurement results

ABSTRACT

The analysis method of Fast Neutron Multiplicity Counting (FNMC) plays an increasingly important role in the measurement of nuclear material properties. Based on the assumption of point model, fast neutron multiplicity measurement equation is derived which can be used to measure the mass of Pu sample. However, the deviation of the simulated measurement of 1 kg Pu sample reaches 16.6% and increases with mass. Because nonpoint source samples of different shapes do not fully satify the hypothesis. To correct this deviation, a set of fast neutron multiplicity counters was built by Geant4 to simulate and study the mass attribute of Pu samples.The cylindrical sources of different shapes and different masses were simulated, the self-multiplication factor and α coefficient were corrected.And the corresponding third-order polynomial fitting equation was obtained, the goodness of fit was greater than 0.970. In the same way, the spherical and spherical shell source samples in the mass range of 0–5 kg were analyzed, the corrected mass deviation of samples was less than 10% in this interval. The results show that the combination of the fast neutron multiplicity counter and parameter correction can accurately measure the sample mass attribute.